Garden Waterproof Sonic Get Rid Off Mole Rodent Solar Gopher Repeller

Garden Waterproof Sonic Get Rid Off Mole Rodent 

Solar Gopher Repeller 

MODEL NO.:AN-A316F

1.By emitting sound waves, the Solar Mole repellent drives Mole away very effectively. The sound waves will irritate them, simulate danger, and repel them away from the irradiated area. Transmitting sound waves every 40 seconds or so, the Solar Mole repellent is effective within an area of 650 square meters.

2.The Solar Mole repellent radiates in all directions. Avoid any obstruction and let the sound waves be emitted freely. To make the best use of the product, we strongly recommend an installation of 2 devices at every 30 meters for ground areas frequented by the mole.

3.The Solar Mole repellent's power is supplied by a solar cell, a rechargeable accumulator collecting power for operation at night. When the accumulator is fully charged, it can supply enough power for the dark hours, thus ensuring a continuous around-the-clock operation.

4.This Solar Mole repellent use computerized inching control technology, it combines the signal output with DC charge function. So the socket is not only signal output socket, but also is external DC charger for consecutive rainy days' use. This new technology applied is more convenient to customers operate and bring the added value to this models.

5.This Solar Mole Repellnt is with garden ligth. LED Light with Automatic Identification System design, decorate your living environment.

6.The Solar Mole Repellent had a additional battery cassette, you can replace the battery easily to lengthen product using life.

The Solar Mole Repellent is with multifunctional slide switch, 3 working modes for choose. I: LED Lights+Mole Repeller. 0: Function off. II: Mole Repeller

How to installing in the ground: Dig the hole in the area where the pests are found, don't hammer the unit into the ground, as this will damage it. Carefully place the unit into the hole, ensuring that the soil comes up to 2/3 the unit.

Technical data: 

Please note:

First, check the ground surface before using it. Frozen soil, irrigated or waterlogged ground is not suitable. 

Dig a hole into solid earth to place the device. The density of the soil will greatly affect the effectiveness 

of the device. The more solid the earth, the better the device will be functioning.

No hammer should be used in installation.

No excessive force should be applied lest the device be damaged.

Installation:

1.Connect the cable with socket at head, tighten can not depart easily (refer to below photo).

2.Fix the bar and the top together.

3.Insert the bar into the earth, be careful not to use excessive force lest the device be damaged, 

or bump into any obstruction. 

 Warning :

1.The base of the top shall be exposed to the outside, according to the terrain varies ensure 

the water does not exceed the save line (note illustration).

2.Before first use,you’d better insolation the solar panel for two days,then connect the cable 2 

and insert into the earth,so you will have better effective.